? 221 west industry court ? deer park, ny 11729-4681 ? phone (631) 586-7600 ? fax (631) 242-9798 ? ? world wide web - http://www.sensitron.com ? e-mail address - sales@sensitron.com ? sensitron semiconductor technical data, provisional data only data sheet 4183, rev. b hermetic silicon carbide rectifier description: a 1200-volt, 20 amp power silico n carbide rectifier in a ceramic hermetic shd-3 high profile package features: ? no recovery time or reverse recovery losses ? no temperature influenc e on switching behavior maximum ratings all ratings are @ t c = 25 c unless otherwise specified. rating symbol max. units peak inverse voltage piv 1200 volts maximum dc output current i o 20 amps maximum repetitive forward surge current (t = 8.3ms, sine) i frm 80 amps maximum non-repetitive forward surge current (t = 10 s, pulse) i fsm 400 amps maximum junction capacitance (v r =400v) c t 130 pf maximum power dissipation p d 40 w maximum thermal resistance (junction to case) r jc 0.90 c/w maximum operating and storage temperature range top, tstg -55 to +200 c electrical characteristics characteristic typ max. units maximum forward voltage drop i f = 20 a, t j =25 c t j =175 c 1.60 2.50 1.80 3.00 volts maximum reverse current piv = 1200v, t j = 25 c t j = 175 c 0.02 0.04 0.80 4.00 ma total capacitive charge (v r =1200v, i f =20a, di/dt=500a/ s and t j =25 c) q c 100 n/a nc shD674122 shD674122b
? 221 west industry court ? deer park, ny 11729-4681 ? phone (631) 586-7600 ? fax (631) 242-9798 ? ? world wide web - http://www.sensitron.com ? e-mail address - sales@sensitron.com ? sensitron technical data, provisional data only data sheet 4183, rev. b mechanical dimensions: in inches / mm shd-3 (high profile) shd-3b (high profile) application note: customers should be aware that at the current stage of technical development of sic, the reverse avalanche capabilities of the device are limited. customer designs will need to accommodate these limitations and avoid exposure of the device to this and other potentially damaging conditions in their applications. shD674122 shD674122b .075 (1.91) max .410.010 (10.4.254) moly lid mol y base .410.010 (10.4.254) alumina ring .090 (2.29) max
? 221 west industry court ? deer park, ny 11729-4681 ? phone (631) 586-7600 ? fax (631) 242-9798 ? ? world wide web - http://www.sensitron.com ? e-mail address - sales@sensitron.com ? sensitron technical data, provisional data only data sheet 4183, rev. b shD674122 shD674122b disclaimer: 1- the information given herein, including the specifications and dimens ions, is subject to change without prior notice to impr ove product characteristics. before ordering, purchas ers are advised to contact the sensitron semiconductor sales department for the latest version of the datasheet(s). 2- in cases where extremely high reliabilit y is required (such as use in nuclear power control, aerospace and aviation, traffic equipment, medical equipment , and safety equipment) , safety s hould be ensured by using semi conductor devices that featur e assured safety or by m eans of users? fail-safe precautions or other arrangement . 3- in no event shall sensitron semiconductor be liable for any dam ages that may result from an accident or any other cause duri ng operation of the user?s units according to the datas heet(s). sensitron semiconductor assumes no responsibility for any intellectual property claims or any other problems that may result from applications of info rmation, products or circuits described in the datasheets. 4- in no event shall sensitron semiconductor be liable for any fa ilure in a semiconductor device or any secondary damage result ing from use at a value exceeding the absolute maximum rating. 5- no license is granted by the datasheet(s ) under any patents or other rights of any third party or sensitron semiconductor. 6- the datasheet(s) may not be reproduced or duplicated, in any form, in whole or par t, without the expressed written permissio n of sensitron semiconductor. 7- the products (technologies) de scribed in the datasheet(s) are not to be provi ded to any party whose purpose in their applica tion will hinder maintenance of international peace and safety nor are they to be ap plied to that purpose by their direct purchasers or any thir d party. when exporting these products (technolog ies), the necessary procedures are to be taken in accordance with related laws and regulatio ns.
|
